|
|
Purpose: Centrifugal Electric Pump Units are intended for delivering feed water at temperature 5 — 210 °Ñ, the maximum size of hard partiñles 0,1 mm, concentration of hard partiñles not more than 5 ìg/l.
| Pump type | Dilivery ì3/h |
Head pressure, m |
Cavitation stock, m |
Pump/unit weight, kg |
Power of the electric motor, kW |
Resource till capital repairs, hour |
|---|---|---|---|---|---|---|
| ÊÎ 100/40 | 90 | 38 | äî 20 | 260 | 22 | 25000 |
| ÊÎ 160/50 | 140 | 49 | äî 20 | 260 | 45 | 25000 |
| ÊÎ 160/50à | 150 | 35 | äî 20 | 260 | 30 | 25000 |
| ÊÎ 250/32 | 250 | 32 | äî 20 | 290 | 45 | 25000 |
Peculiarities: Pumps centrifugal, horizontal, single-stage with axial supply. The stator part is made of corrosion-resistant chromic steel. The end packings are of end seals or stuffing-box type.
Purpose: Pumps cantilever special are intended for evacuation of drainage waters from undergrounds as well as delivering water (except for sea water) and other liquids similar to water in density, viscosity and chemical activity at temperature 5 — 105 °Ñ, the maximum size of hard partiñles — 0,2ìì.
| Pump type | Dilivery ì3/h |
Head pressure, m |
Cavitation stock, m |
Pump/unit weight, kg |
Power of the electric motor, kW |
Resource till capital repairs, hour |
|---|---|---|---|---|---|---|
| 2Ê 160-100d | 155 | 110 | 5 | 280 | 75 | 12500 |
| 2Ê 100-100d | 100 | 110 | 5 | 280 | 55 | 12500 |
| 2Ê 100-100d1 | 100 | 120 | 5 | 280 | 55 | 12500 |
| 2ÊÎ 100-160 | 100 | 160 | 1,6 | 260 | 75 | 28000 |
Peculiarities: The pumps are centrifugal, horizontal, two-stage, cantilever with axial or lateral delivery of pumped over liquid. The stator part is made of corrosion-resistant steel. The end packings are of end seals or stuffing-box type.